Puhui Electric Technology Co. Ltd

Model Number: MT-60 Key Specifications/Special Features: Technical parametersItem specificationName multi-axis automatic placement machine Model MT-60Placement head quantity1Speed <6200CPHPositioning accuracy 0.025mmFeeders number 56（8mm=50,12mm=4,16mm=2），Applicable components 0603-1206，diode, triode, capacitance, resistance, chip, etc.Feeders 8mm=50，12mm=4，16mm=2Offline store the number of files 20Applicable PCB 300mm×400mmPower supply220V，50/60Hz，350WVacuum pump0～30Kpa（Low vacuum），20L/min
Operating system Windows XP/ Win 7/ Win8
External dimension 1566mm×884mm×367mm
Weight110Kg
Fault detection leak detection, congestion detection, pressure detection
Operation 1 ——Connect with computer
1.Connect MT-60 with computer by using RS232wire, open the control software, turn on the power of MT-60.
2.Click “main menu” - “system parameter, you will see “system parameter setting dialog box”, click serial port, you will see the current name of the serial port.
3.Select the serial port which match with RS232 wire.
4.Click OK, you will see the notice information in the bottom left corner of page。
5.At this time, Press “OK” at MT-60 operation panel, start to connect with computer, it connect successfully when MT-60 operation page show “already connected with computer”